Attwood 4650-7 Tsunami Aerator Pump, 800 GPH

#ad
Attwood 4650-7 #ad - This attwood tsunami t800 aerator Pump features innovative engineering and a compact design to provide the most reliable aeration in contained spaces such as a livewell. This pump features the most advanced materials, including premium-quality bearings and state-of-the-art brushes, alloys, and magnets.

. Pump with innovative engineering and compact design provides the most reliable aeration in contained spaces such as livewell. Powerful, reliable pump is rated for 800 gallons per hour gph output at design voltage 13. 6 volts dc, or 750 gph at nominal voltage of 12 volts DC. The patented shaft seal prevents leaks caused by misalignment, and the caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion.

Attwood 4650-7 Tsunami Aerator Pump, 800 GPH #ad - 12-volt pump connected with 29-inch wire. Cooler-running motors, premium materials, watertight seals and waterproof wiring. Uses less power for long pump and battery life. Pumps fresh, oxygen-rich water to livewells and baitwells. The motor cartridge locks for secure placement, maintenance, and unlocks for easy cleaning, and replacement.

This powerful and reliable t800 model is rated for 800 gallons per hour gph output at design voltage 13. 6 volts dc, or 750 gph at nominal voltage of 12 volts DC.

#ad



T-H Marine AS-1-DP Aerator Screen Strainer, 3/4"-14 Thread

#ad
T-H Marine AS-1-DP #ad - Thread: 3/4"-14. These screw-on stainless steel wire mesh strainers are designed to provide effective, dependable protection against trash or fish scales which could clog drains in bait wells or pump impellers in aeration systems. Use on any aerator pump intake. Simply screws onto threaded pump intake in livewell or on exterior of boat.

#ad



attwood Corporation 3899-3 Straight Threaded Barb Fitting Connector

#ad
Attwood 3000.6428 #ad - Use on any aerator pump intake. Hose connections: 3/4" barbed, 3/4"-14 npsm threaded; Overall Dimensions: 1 3/8" diameter x 2 1/4" H. Straight connector - straight Threaded Barb Fitting-Threaded female end fits 3888 drain fitting. Hose. Thread: 3/4"-14. Part manufacturer: attwood; part number: 3899-3; upc: 022697389930; Boat Manufacturer: Ranger Boats; Part Number: 1375278.

attwood Corporation 3899-3 Straight Threaded Barb Fitting Connector #ad - A-series aerator pump outlets and Tsunami threaded outlets. For 3/4 inch-14 threads and 3/4 inch I. D. Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included. Constructed from white marine grade plastic, and is used with A-Series aerator pump outlets and Tsunami threaded outlets.

Simply screws onto threaded pump intake in livewell or on exterior of boat.

#ad



Attwood 3001.4872 Corporation 4125-7 Aerator Spray Head

#ad
Attwood 3001.4872 #ad - Use on any aerator pump intake. Ideal for mounting on side of tank. Single valve aerator head for side mounting. Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included. D. Knob is removable. Can be installed in tanks with a maximum 5/8 inch tank wall thickness.

Part manufacturer: attwood; part number: 3899-3; upc: 022697389930; Boat Manufacturer: Ranger Boats; Part Number: 1375278. Constructed from white marine grade plastic, and is used with A-Series aerator pump outlets and Tsunami threaded outlets. Simply screws onto threaded pump intake in livewell or on exterior of boat.

Attwood 3001.4872 Corporation 4125-7 Aerator Spray Head #ad - For use with ¾ inch inside diameter hose. Hose connections: 3/4" barbed, 3/4"-14 npsm threaded; Overall Dimensions: 1 3/8" diameter x 2 1/4" H. Durable polypropylene construction. Made of durable plastic for corrosion resistance. Integral 90-degree fitting allows for compact and fast installation. Hose for live well system with built-in overflow or recirculating systems, Features rotating knob with O-ring to adjust and maintain flow setting.

For 3/4" I.

#ad



Attwood 4608-7 Tsunami T800 Bilge Pump

#ad
Attwood 4608-7 #ad - 6 volts dc, or 760 gph at nominal voltage of 12 volts DC. Constructed from white marine grade plastic, and is used with A-Series aerator pump outlets and Tsunami threaded outlets. The t800 has a barbed ¾-inch outlet. Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets. The patented shaft seal prevents leaks caused by misalignment, and the caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion.

Innovative engineering and compact design to provide the most reliable bilge pumping performance. Hose connections: 3/4" barbed, 3/4"-14 npsm threaded; Overall Dimensions: 1 3/8" diameter x 2 1/4" H. Adjustable spray head enhances livewell water quality. Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that's what the Tsunami Series delivers with high-capacity, high-efficiency output.

Attwood 4608-7 Tsunami T800 Bilge Pump #ad - . Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included. Patented shaft seal prevents leaks caused by misalignment, prevents water damage, caulked and tinned wiring eliminates wicking, and resists corrosion.

12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire. Can be installed in tanks with a maximum 5/8 inch tank wall thickness.

#ad



Shoreline Marine Bilge Pump Plumbing Kit with 3/4 Inch X 5 Feet Hose

#ad
Big Game International SL52253 #ad - The shoreline maine bilge pump plumbing kit comes complete with a 5’ reinforced ¾” ID bilge hose, one ¾” Thru-Hull fitting and two Stainless Steel hose clamps. Constructed from white marine grade plastic, and is used with A-Series aerator pump outlets and Tsunami threaded outlets. Innovative engineering and compact design to provide the most reliable bilge pumping performance.

Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included. 6 volts dc, or 760 gph at nominal voltage of 12 volts DC. Tsunami cartridge pumps have replaceable / interchangeable motor cores. Thread: 3/4"-14.

Shoreline Marine Bilge Pump Plumbing Kit with 3/4 Inch X 5 Feet Hose #ad - Ideal for mounting on side of tank. 3/4 inch id x 5 feet corrugated hose. For use with ¾ inch inside diameter hose. Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets. Use on any aerator pump intake. Verify bilge pump dimensions before purchase. Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion.

12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire.

#ad



Seachoice 89621 Stainless Steel Mesh Strainer ¾" - 14

#ad
Seachoice 89621 #ad - Thread: 3/4"-14. Makes servicing simple and quick. 6 volts dc, or 760 gph at nominal voltage of 12 volts DC. Constructed from white marine grade plastic, and is used with A-Series aerator pump outlets and Tsunami threaded outlets. Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included.

Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Tsunami cartridge pumps have replaceable / interchangeable motor cores. 2 stainless Steel Hose Clamps. Can be installed in tanks with a maximum 5/8 inch tank wall thickness. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and water sports enthusiasts worldwide.

Seachoice 89621 Stainless Steel Mesh Strainer ¾" - 14 #ad - Part manufacturer: attwood; part number: 3899-3; upc: 022697389930; Boat Manufacturer: Ranger Boats; Part Number: 1375278. Fits ¾ inch – 14 female thread. Innovative engineering and compact design to provide the most reliable bilge pumping performance. Use on any aerator pump intake. Color: black. Designed to prevent debris from clogging baitwell drains and aerator pumps, this screw on wire strainer features stainless steel mesh molded into a black PVC base.

#ad



Shoreline Marine Bilge Pump 800 GPH

#ad
Shoreline Marine SL52259 #ad - Makes servicing simple and quick. Powerful, reliable pump is rated for 800 gallons per hour gph output at design voltage 13. Durable polypropylene construction. Ideal for mounting on side of tank. Fits ¾ inch - 14 female thread. The universal mounting bracket makes the installation easy regardless of your application.

Corrosion resistant stainless steel wire mesh prevents trash and other debris from entering pump. Molded PVC Base. Innovative engineering and compact design to provide the most reliable bilge pumping performance. For use with ¾ inch inside diameter hose. Tsunami cartridge pumps have replaceable / interchangeable motor cores.

Shoreline Marine Bilge Pump 800 GPH #ad - Outlet hose barb is designed to be used with standard ¾" I. D. Color: black. The outlet hose barb is ¾” for use with a common ¾” bilge hose and through-hull fitting. Must be used with a bilge pump equipped with a 3/4 inch od outlet barb only. The impeller shaft is stainless steel, the wires are tinned marine grade, the housing is sealed and it’s easy to remove from the mounting base to clean and inspect.

The shoreline marine 800 gph bilge pump securely clips into the mounting base for easy installation and is removable to clean and inspect the pump.

#ad



Attwood 4640-7 Corporation Pump Aerator Tsunami 500Gph

#ad
Attwood 4640-7 #ad - Pump with innovative engineering and compact design provides the most reliable aeration in contained spaces such as livewell. Durable polypropylene construction. The patented shaft seal prevents leaks caused by misalignment, prevents water damage, and the caulked and tinned wiring eliminates wicking, and resists corrosion.

Must be used with a bilge pump equipped with a 3/4 inch od outlet barb only. 12-volt pump connected with 29-inch wire. Verify bilge pump dimensions before purchase. The t500 has a ¾-inch diameter, 3 ½-inch-long inlet, and a threaded ¾-inch interior diameter outlet. Tsunami cartridge pumps have replaceable / interchangeable motor cores.

Attwood 4640-7 Corporation Pump Aerator Tsunami 500Gph #ad - Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that's what the Tsunami Series delivers with high-capacity, high-efficiency output. 3/4 inch Thru Hull. Ideal for mounting on side of tank. Makes servicing simple and quick. Simply screws onto threaded pump intake in livewell or on exterior of boat.

Innovative engineering and compact design to provide the most reliable bilge pumping performance. Fits ¾ inch - 14 female thread.

#ad



Flow-Rite MV-03-FN01 V3F Control Valve

#ad
Flow-Rite MV-03-FN01 #ad - Powerful, reliable pump is rated for 800 gallons per hour gph output at design voltage 13. It also has a third closed "RECIRC" position. Powerful, reliable pump is rated for 500 gallons per hour gph output at design voltage 13. 6 volts dc, or 450 gph at nominal voltage of 12 volts DC. Can be installed in tanks with a maximum 5/8 inch tank wall thickness.

Fits ¾ inch - 14 female thread. 3/4 inch Thru Hull. Innovative engineering and compact design to provide the most reliable bilge pumping performance. 12-volt pump connected with 29-inch wire. 2 stainless Steel Hose Clamps. Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included.

Flow-Rite MV-03-FN01 V3F Control Valve #ad - . Ideal for mounting on side of tank. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Outlet hose barb is designed to be used with standard ¾" I. D. This universal mounting base is designed to be mounted either through the bottom or through the side so it can be screwed down into a mounting pad or to a stringer or the transom.

#ad



Attwood 3877-3 White One Size boating-plumbing-fittings

#ad
Attwood 3877-3 #ad - Outlet hose barb is designed to be used with standard ¾" I. D. Can be installed in tanks with a maximum 5/8 inch tank wall thickness. Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets. 3/4 inch Thru Hull. The shoreline marine 800 gph bilge pump securely clips into the mounting base for easy installation and is removable to clean and inspect the pump.

Ideal for mounting on side of tank. 3/4 inch id x 5 feet corrugated hose. Sold as seen in pictures; note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included. Requires 1 inch installation hole. For use with ¾ inch inside diameter hose.

Attwood 3877-3 White One Size boating-plumbing-fittings #ad - Durable polypropylene construction. 12-volt pump connected with 29-inch wire. Hose connections: 3/4" barbed, 3/4"-14 npsm threaded; Overall Dimensions: 1 3/8" diameter x 2 1/4" H. Pump with innovative engineering and compact design provides the most reliable aeration in contained spaces such as livewell. 6 volts dc, or 760 gph at nominal voltage of 12 volts DC.

Must be used with a bilge pump equipped with a 3/4 inch od outlet barb only. Part manufacturer: attwood; part number: 3899-3; upc: 022697389930; Boat Manufacturer: Ranger Boats; Part Number: 1375278.

#ad