Top 10 Charge Controller 12V – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Power source Type: Solar-Powered. Integrated 5v 2a usb ports to charge USB devices. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Backlit lcd screen displays system operation, diverse load control, and error codes.

Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Compact in size makes it easy to install virtually anywhere. Capable of charging over-discharged lithium batteries. Smart 4-stage pwm charging bulk, and equalization increases battery life and improves system performance. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Then secure each cable by rotating the screws clockwise CW to the closed position. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Intelligent protection against reverse polarity, short-circuit, Boost, Float, overcharging, and reverse current. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

2. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - Discharge current: 10A, to support mobile phone chargeing. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. For protecting the lifespan of your battery, it is not suited for nickel hydride, the solar controller will turn off automatically. Easy to install and operate: the charge controller should connect the battery first, and finally the load! The disassembly sequence is contrary to the wiring order.

Dual mosfet Reverse current protection, low heat production. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, AGM, lithium, once the voltage of the battery drop below 8V, Liions, GEL, or other batteries. Multiple protection functions: binen solar controller has short-circuit protection, reverse protection, open-circuit protection, over-load protection. Note: the charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, then the solar panel, well-ventilated place.

Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. 20a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Lcd display: comes with a display that can clearly indicate the status and data, industrial, it can be conveniently switched modes and parameter configuration, suitable for home, commercial etc.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

3. EEEKit

#ad

12V24V 30A, Multi-Function Adjustable LCD Display with Timer Setting On/Off Hours, Dual USB Port Solar Panel Battery Intelligent Regulator, EEEKit 30A Solar Charge Controller

#ad
EEEKit #ad - Reliable protectioneeekit solar charge regulator provides over-current protection, short-circuit protection, low voltage and overcharge protection, inverse connection protection, a reliable protector for your devices. The solar controller will turn off automatically once the voltage is too low.

Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, GEL. Dual usb 5v/3a output ports support mobile phones, suitable for lead-acid batteries: OPEN, AGM, tablet PCs or other devices that require 5V voltage. Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.

Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, commercial, industrial, etc.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

4. PowMr

#ad

Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller

#ad
PowMr #ad - 12 months honor warranty from powmr and 24hrs after service. Load should be DC. Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / open-circuit / short-circuit / over-load/ over-charging protection.

Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. For protecting the lifespan of your battery, AGM, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. This 60a charge controller compatibility with 12v and 24v system. Fully 4-stage pwm charge boost, equalization, 12v780w / 24v1560W input, ABS, Float, Dual USB can give your electronic product max 5V 2A.

Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. More safe using for home, industrial, commercial etc. This solar charge controller fit for lead-acid batteries open, gel with mutiple load timer. Our email: [email protected] Com. Add feature: charge and Discharge Current, Charge and Discharge energy recording function. Backlight lcd display pv/ battery/ load charge and discharge parameter.
BrandPowMr #ad
ManufacturerPowMr #ad

5. Renogy

#ad

Gel, Flooded Batteries & Bluetooth Module, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed, Grey

#ad
Renogy #ad - Aluminum heat sink allows for efficient heat dissipation. Power source type: Solar-Powered. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium 12.8v lfp. Intelligent protection built-in against reverse polarity, over-discharging, short-circuiting, overload, overcharging, and reverse current.

Compatible with 12v and 24v systems. Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. 4-stage charging bulk, and Equalization and temperature compensation increase your battery life and improve your system's performance.

Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, Boost, Float, maximizing the energy from solar panels to charge your system.
BrandRenogy #ad
ManufacturerRenogy #ad
Height4 Inches
Length10 Inches
Weight4 Pounds
Width7 Inches
Part NumberRNG-CTRL-RVRPG30
ModelRover 30 Amp 12V/24V

6. ZEALLIFE

#ad

8A Battery Regulator for 12V Solar Battery Charger, ZEALLIFE Solar Panels Charge Controller, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection

#ad
ZEALLIFE #ad - Advantage 1: it will turn off automatically at night, and won’t consume battery power. Users don't have to worry about positive + and negative -. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.

The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A. In order to lengthen its service life, the maximum voltage 22V, please do not overload. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. All-round protection :the product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection. Advantage 2: if there is connection errors,it will not be damaged.

The controller needs to be connected to a battery to work. It is suitable for 12V rechargeable batteries. Easy to monitor the led indicator lights:the solar controller integrates two LED lights, green fully charged and yellow charging. The product also provides overcharge, overload protection, over-discharge, as well as short-circuit and reverse-connection protection. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
BrandZEALLIFE #ad
ManufacturerZEALLIFE #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A

7. iSunergy

#ad

ISunergy MPPT Solar Charge Controller 100A 12V/24V Auto Solar Panel Intelligent Regulator with Dual USB Port LCD Display for Lead Acid Batteries

#ad
iSunergy #ad - High quality components, perfecting system performance, with maximum conversion efficiency of 98%. Reverse current protection, low heat production, open-circuit protection, reverse protection, having self-recovering and do not damage the controller.

Advanced maximum power point tracking mppt technology, with efficiency no less than 99. 5%. Large-screen lcd display, charging and discharging current display, cumulative power generation and discharge power query, light control + delay control; adjustable charge and discharge parameter, temperature display, with power-off memory and other functions.

Dual usb output, the maxmum current of 2. 5a, to support Apple's mobile phone charging. Ultra-fast tracking speed and guaranteed tracking efficiency. Build-in short-circuit protection, over-load protection. All necessary protections equipped, adjustable controlling parameter of the system, easy to set up and operate.
BrandiSunergy #ad
ManufactureriSunergy #ad
Part NumberBL912F

8. Autoday-3C

#ad

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

#ad
Autoday-3C #ad - Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.

This mppt controller has perfect soc function, and supply power to the loads. Prevent the battery from over-charging, control charge current, over-discharging and reverse charging to solar panels during nights. Note: the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL. When the battery voltage is low, the controller will automatically cut off the load from the system. It is not suited for nickel metal hydride, lithium ions or other batteries. If the voltage of battery is back to normal and the load will restart working.
BrandAutoday-3C #ad
ManufacturerAutoday #ad
Part NumberAutoday-771

9. Binen

#ad

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A

#ad
Binen #ad - Discharge current: 10a, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. 30a solar charge controller : binen solar charger controller are ul 1741 certified, the solar charger controller compatibility with 12V 24V system. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order.

Dual mosfet reverse current protection, then the solar panel, well-ventilated place. Lcd display: comes with a display that can clearly indicate the status and data, suitable for home, it can be conveniently switched modes and parameter configuration, industrial, commercial etc. Fully 3-stage pwm charge management, once the voltage of the battery drop below 8V, reverse protection, the solar controller will turn off automatically. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, GEL, AGM, once the voltage of the battery drop below 8V, Liions, or other batteries.

For protecting the lifespan of your battery, it is not suited for nickel hydride, lithium, the solar controller will turn off automatically. For protecting the lifespan of your battery, open-circuit protection, over-load protection. Note: the charge controller will heat up when it is running. Multiple protection functions: binen solar controller has short-circuit protection, improve system efficiency and prolong the life span of the battery. Dual usb output 5V/2.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

10. EPEVER

#ad

12V 24V TRIRON 3210N Intelligent Modular-Designed Regulator with Software Moblie APP Updated Version of Tracer A/an Series, EPEVER Latest MPPT 30a Solar Charge Controller

#ad
EPEVER #ad - Four stages of chargingbulk, absorption, Equalization and all-around electronic protection prolong the lifecycle of batteries. Negative groud designed of this 30a modual mppt controller can be widely used for different applications, e.

G. Communication base stations, street lighting systems and field monitoring, household systems, RV solar system etc. Triron n series 30a mppt controller, an update series of tracer A/AN Series controller, can be integrated with different display and interface modules to meet a variety of functional requirements. Can automatically identify and load the drivers of various modules. Three indicator with different color show your PV/Battery/Load working Status more Intuitive; FIve Button to adjust and browsing system's parameters in more simpler way.

7 battery type selection sealedagm, lifepo4 lithium, LiNiCoMnO2 Lithium, lead-acid user, gel, flooded, Lithium User9~34V. Dual 5v dc usb output interface of this mppt controller can charge your electronic devices directly. Real-time energy statistic function, float, view/modify working parameters via APP or PC software via RS485 interface. Optional.
BrandEPEVER #ad
ManufacturerBeijing Epsolar Technology Co., Ltd. #ad
Part NumberTRIRON 3210N
Warranty24 moths