Top 10 Flush Mount Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Flooded and Lithium Batteries, Compatible with Sealed, Gel, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#ad
Renogy #ad - This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc.

Backlit lcd screen for displaying operating information and error codes. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current.5v 2. The adventurer is a negative ground controller. An included surface Mount Attachment allows for versatility in mounting. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. Designed to cleanly flush mount on walls, providing a sleek, integrated look. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.6 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

2. Renogy

#ad

Renogy 100 Watt 12 Volt Extremely Flexible Monocrystalline Solar Panel & Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#ad
Renogy #ad - This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Etfe material also has antifouling and self-cleaning abilities, ensure best performance day after day. Intelligent protection against: reverse polarity, Boost, overcharging, short-circuit and reverse current.

Product 1: etfe material has higher light transmittance, longer service life than PET material. Product 1: thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze. Product 2: the adventurer is a negative ground controller. Product 2: backlit lcd screen for displaying operating information and error codes. Product 1: with a flex range of up to 248 degrees, this panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream.

5v 2. 4a usb port on the front display can be used to charge mobile phones, tablets, speakers, etc. Product 2: smart 4 stage pwm charging bulk, float and Equalization and temperature compensation increases battery life and improves system performance. Product 1: sleek and barely noticeable, the renogy 100W flexible solar panel laid flat is only a tenth of an inch tall! Approximately 95% thinner than its rigid counterpart, this panel is ideal for a stealthy solar setup.
BrandRenogy #ad

3. AIMS Power

#ad

AIMS Power Flush Mount 10 Amp Solar Charge Controller 12/24V PWM

#ad
AIMS Power #ad - Supported with a 2-year warranty from AIMS Power when purchased from authorized resellers. Uses the latest pwm charging technology and state of charge monitoring, adjusts charging based on battery voltage prolonging overall battery life.

Lcd displays key information such as battery voltage, solar panel voltage, solar panel charging current and load discharging current. Small and compact ideal for small areas. Works with 12 and 24 volt battery systems. Pv input, battery output ports DC load port on 10amp. Protections: overload, high voltage, short circuit, high temperature, low voltage and auto correct.
BrandAIMS Power #ad
ManufacturerAIMS POWER #ad
Weight1 Pounds
Part NumberSCC10AFM
Warranty1 Year Manufacturers Warranty with AIMS Power (Must purchase from authorized reseller)

4. WindyNation

#ad

WindyNation P30LF Flush Mount 30A Solar Charge Controller with LCD Display and Battery Temperature Sensor

#ad
WindyNation #ad - Features the following safety and protection features: overcharging and discharging if load is connected, overload, reverse polarity, and short-circuit. This delivers a prolonged battery life.

Utilizes a best in class four stage charging Bulk, Flooded, Equalize algorithm to achieve optimal battery performance and longevity. Compatible with agM, Float, Boost, and Gel batteries. The p30lf flush mount controller is negative ground controller compatible with 12 Volt and 24 Volt batteries. The p30lf is a flush mount charge controller. This means it is designed to be seamlessly mounted onto a flat wall surface, clean, producing a professional, and integrated look. Included battery temperature sensor BTS provides optimal charging based on battery temperature.
BrandWindyNation #ad
ManufacturerWindyNation #ad
Part NumberCHC-LCD-30FM
ModelCHC-LCD-30FM

5. RICH SOLAR

#ad

RICH SOLAR 30A 12V/24V PWM Flush Mount Solar Charge Controller w/LCD Display

#ad
RICH SOLAR #ad - Any negative connection on the solar module, battery and load can be safely earth grounded as required. Digital lcd monitor for informative display of operational parameters and fault messages.

3-stage intelligent pwm charging: Bulk, Boost/Equalize, Float AL 22:14. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Negative ground controller. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. Rs485 communication port with modbus protocol, and short circuit protection for 5V/200mA power supply, APP, cloud platform software, multiple peripherals: PC software, etc.
BrandRICH SOLAR #ad
ManufacturerRICH SOLAR #ad

6. Blue Sky Energy

#ad

Fully programmable for Lead-Acid or Lithium Batteries. Auxiliary Output for Dual Battery Charge or 20A LVD Load Output, Blue Sky Energy SB3000i Solar Boost 30A MPPT Charge Controller with Display

#ad
Blue Sky Energy #ad - Fully programmable multi-stage charge profile for Lead-Acid and Lithium batteries through the onboard display. Datasheet in “Product Information” below.

Perfect for rvs and marine, Flush mounting, and real-time data through the onboard display. Max. 5-year warranty, made in the usa, ce/fcc/roHS certifications. Auxiliary output programmed for max 20A with LVD or for 2A maintaining of a secondary battery. Recommended panel voc at stc 40v max voltage input 50V. Mppt solar charge controller for 12v-nominal battery pb or Li, charge current 30A with 36-cell panels max 400W or 22A with 60-cell panel max 290W.
BrandBlue Sky Energy #ad
ManufacturerBlue Sky Energy #ad
Height2.5 Inches
Length6.5 Inches
Weight1.09 Pounds
Width4.75 Inches
Part NumberCCTLR-BS-MPP-030A
ModelCCTLR-BS-MPP-030A
Warranty5 year limited warranty

7. EPEVER

#ad

Gel, and Flooded Battery, EPEVER Solar Charge Controller 30A PWM Solar Panel Regulator Flush Mount 12V/24V Max Input 360W/720W Negative Ground for Sealed

#ad
EPEVER #ad - Negative-ground charge controller. Protection against: overcharging, overload, and reverse polarity. Gm3024n is a flush mounted 30 amp negative-ground solar charge controller regulator max solar panel Input 360W/720W, solar boats, mobile service vehicles, equipped with Pulse Width Modulated PWM charging mode.

30a solar controller real-time operating information and data are displayed on LCD. It’s compatible with 12v/24v photovoltaic systems and can be applied to any off-grid solar system such as Recreation vehicles RVs, etc. Control parameters are fully programmable with a variety of methods including PC software, Bluetooth module, Mobile app, and Wi-Fi module as well. Compensates for temperature, pv current, rated charging current at working temperature without de-rating.

This solar charge regulator compatible with sealed, and Flooded batteries. Rs485 communication port with Modbus protocol, short-circuit, and short circuit protection for 5V/200mA power supply. 3-stage intelligent pwm charging: Bulk, Gel, Boost / Equalize and Float. Automatic cycle interface: PV voltage, PV power, Battery voltage and Battery temperature. Prevents batteries from over-charging and over-discharging.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Height1.9 Inches
Length7.03 Inches
Width4.15 Inches

8. wosume

#ad

Solar Charger Controller Embedded Voltage Regulator with 2Pcs Connectors 12V/24V, wosume 30A Flush Mount Solar Charge Controller

#ad
wosume #ad - Embedded installation design, easy to install and remove. With real-time energy statistics, battery temperature compensation, With extensive electronic protection. Digital lcd monitor for displaying operating parameters and fault information, Can monitor and set parameters through PC software or APP. Level 3 smart pwm charging: batch, rs485 communication port, boost/balance and floating, short circuit protection, suitable for 5V / 200mA power supply. High quality and low failure rate components S-T / IR to ensure product life.
Brandwosume #ad
ManufacturerWosume #ad
Height2.36 Inches
Length8.27 Inches
Weight0.93 Pounds
Width4.72 Inches
Part NumberWosumevwnaze5r90

9. Jadpes

#ad

Solar Controller 12V/24V Intelligent Solar Charge Controller with Digital Display Flush Mount Charge ControllerST-F 12V30A, Jadpes Solar Charge Controller

#ad
Jadpes #ad - Efficient digital PWM charging helps protect battery life. Electronic protection features, overdischarging, overload, overcharging, short circuit and reverse protection of solar modules. High quality, waterproof PWM solar charge controller, ideal for extreme environments. The load power output can be configured to automatically recognize day and night, so solar lighting can be turned on automatically at dusk. Ip67, waterproof, suitable for outdoor and marine use.
BrandJadpes #ad
ManufacturerJadpes #ad
Height0.39 Inches
Length0.39 Inches
Weight0.44 Pounds
Width0.39 Inches
Part NumberJadpeswx8gq2z9pa-01

10. Renogy

#ad

Renogy 300 Watts 12 Volts Monocrystalline Solar RV Kit with 30A PWM LCD Charge Controller/Solar Panel Connectors/Tray Cable/Corner Bracket Mount/Cable Entry housing for RV, Boat

#ad
Renogy #ad - Power source type: Solar Powered. Corrosionresistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa.

Order will be delivered in multiple packages; Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. Complete kit includes: 1 renogy 300 watt 12 volt monocrystalline solar Panel 2 Adventurer Li 30A PWM Flush Mount Charge Controller 3 Connectors 4Tray Cable 5Corner Bracket Mount 6 Adaptor Kit. This kit includes our adventurer 30A PWM Flush Mount Charge Controller can charge the battery quickly and safely under almost any condition. Monocrystalline solar cell efficiency: 21%. Designed for off-grid solar panel system, RV, caravan, boat, Green house solar panel system.
BrandRenogy #ad
ManufacturerRenogy #ad
Height8 Inches
Length48 Inches
Weight66 Pounds
Width23 Inches
Part Number791810324546
Model300 Watts 12 Volts Monocrystalline Solar
Warrantyf gifted or resold the customer must go through the original Purchaser in order to claim warranty. Original order information is needed to claim warranty.If original order was shipped within the US, the Purchaser will be responsible for additional shipping costs out of the US.The Customer’s sole and exclusive remedy and the entire liability of the Warrantor, its suppliers and affiliates for breach of the warranty is, either to replace the PV module(s)or component partsof the PV module(s) and in some cases refund the PV module(s) cost. This warranty does not cover labor.PV modulesor components that have been serviced or replaced under their warranty period do not receive extended warranties. Instead, the serviced/replaced PV module(s)will abide to the original warranty period issued when first purchased. No employee, agent, dealer or any other person is authorized to give any warranties on behalf of the Warrantor, not expressly set forth in this limited warranty.