StarTech#ad - Support for 48-bit Logical Block Addressing LBA. Compliant with SATA revision 1. 0 specification. Supports sata i/ii/iii 1. 5/3/6gbps drives. Complete hardware solution; no software required. Connect a sata device to an IDE/ATA motherboard or controller card.
NFHK#ad - Works with all 2. 5/3. 5" sata drives. 3. 5 inch sata hdd drive to idE 40Pin mainboard converter Board. No driver needed, plug and play, unit is not hot swappable. Supports ide 66/100/133MB/s. With master and slave jumper.
chenyang#ad - 3. 5 inch ide/pata 40pin hdd drive to sata Female Converter Adapter PCBA. Compatible with dos, me, 2000, 2003, plug and play, Windows 7 & Linux. Adapter is good for up grading an old computer with 3.
5 inch ide hdd to a new 3. 5 inch sata hdd or SSD. No driver needed, xp, windows 98/98se, vista, unit is not hot swappable. Supports ide 66/100/133mb/s. For desktop & 3. 5" hard disk drive, works with all IDE 40Pin Drives up to 1000GB. No need for an extra power supply.
3. 5 inch ide 40pin hdd drive to sata converter board Works with all IDE 40Pin Drives up to 1000GB. Compatible with dos, 2003, xp, vista, windows 98/98SE, me, 2000, Windows 7 & Linux. No driver needed, plug and play, unit is not hot swappable.
SinLoon#ad - This sata to ide adapter, No driver needed, plug and play. Package contents: sata to Pata Interface Adapter 1PCS. Converts parallel atapata, ata, ide to serial ata sata converts SATA to PATA/ATA/IDE/EIDE.
One female sata 7+15pin port, one 3. 5male pata port 40-pin IDE, and one 4-pin Molex power connection Adapter. Adapter allows you convert hard drive interfaces to work with newer/older systems Supports ATA.
AGPTEK#ad - Use your 2. 5" / 3. 5" ide hard drive or sata hard disc as an external hard drive. Agptek sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable.
This usb sata ide adapter is easy to use and plug & play, no drivers needed. 480 mb/s high speed transfer rate USB 2. 0 specification, limit depend on the IDE device/SATA device and the driver. Usb 2. 0 standard, 480M bps full speed.
External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage. Connect your ide to usb adapter to your computer through a USB port. Connect to the ide device using usb interface and SATA device too. Usb 2. 0 to 2. 5" 3. 5" ide sata hdd hard drive converter adapter cable + ac power adapter, supports sata hard disk / ata/atapi cd-rom/r/RW DVD-ROM based on ATAPI spec.
FIDECO#ad - If 2. 5" and 3. 5" ide hard drives are connected simultaneously, you need to set jumper. It can be also backward compatible with USB 2. 0/1. 1. Just plug and play! no driver or software is needed! Maximum 5gbps super speedfideco hard drive adapter is engineered with usb 3.
0 port and can offer data transfer speeds up to 5Gbps. Data transfer has never been so much easier and faster. Compatible systemfideco hard drive reader is widely compatible with Windows, Mac OS, and Linux.
Supported hdd/ssdfideco ide and sata adapter is compatible with 2. 5”/3. 5” sata/ide hard drives. The default master is 2.
5" ide hard drive, so you need to set jumper for 3. 5" ide hard drive and set it to slave. Easy set-upsimply insert your hard drive, and then turn on the device by pressing the power switch. Note: For 3. 5” ide hdd, connect the power adapter and USB cable, you need to connect the 4-pin power cable. It can support the connection of 3 hard drives simultaneously: one 2. 5” ide, one 3.