Top 10 Rain Barrel Spigot – Outdoor Faucets

As an Amazon Associate I earn from qualifying purchases.

1. RAINPAL

#ad

RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn SpigotLead Free Compliant

#ad
RAINPAL #ad - You need to have the access to the inside of container to install the nut. U. S. Standard, break or crack. Solid brass quarter turn ball Valve Spigot, Garden Hose Hookup, with Aluminum Alloy Handle.

Tools needed for installation: electric drill, and pipe wrench or adjustable wrench w/ 1 inch capacity. Thread tape NOT required. Lift time warranty against leak, break or crack. Design, 7/8 inch hole saw, U. S. Customer service, lifE TIME Warranty against leak, U. S. Contains less than 025% lead, for more information about “Lead Free Compliant", Lead Free Compliant, please visit epa. Gov. Universal design for any open lid barrels or containers, fit up to 1/4 inch wall, Need 21 mm or 7/8 inch diameter hole to install.
BrandRAINPAL #ad
ManufacturerOLDEGG Innovations, LLC #ad
Height1.8 Inches
Length3 Inches
Weight8 ounces
Width1.3 Inches
Part NumberRBS005
WarrantyLife Time Warranty against Leak, Break or Crack

2. EarthMinded

#ad

Installs From Outside of Drum or Barrel, Rain Barrel Spigot: Fits Standard Garden Hose, INSTRUCTIONS INCLUDED, Turn Any Barrel or Trashcan Into a Rain Barrel

#ad
EarthMinded #ad - Easy to install - spigot fits 1 1/4" hole & includes plastic seal; use the rain barrel spigot to replace missing or old spigots. Added convenience - garden hose connection is located on the outlet which allows a straight water path reduces turbulence and increases flow rate.

Save water and money - collect and conserve chemical-free rain water, reduce your water bill and use environmentally friendly methods to water your plants and complete your outdoor chores. On/off turn valve - easily twist the turn valve to release or stop as much water as desired. Fill faster - the rain barrel spigot allows you to fill watering cans & pots faster with less waiting.
BrandEarthMinded #ad
ManufacturerEarthMinded #ad
Height3.25 Inches
Length4.5 Inches
Weight0.13 Pounds
Width3.75 Inches
Part NumberF-RN023
Model410

3. RAINPAL

#ad

RAINPAL RBS022 Lead Free Compliant Brass Rain Barrel Spigot3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting and Thread Tape

#ad
RAINPAL #ad - Fit up to 1/2 inch thickness wallworks great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 01-02 inch.

Bulkhead fitting need 1-1/4 inch diameter hole to install. Contain less than 025% lead, lead Free Compliant. Heavy Duty 6. 0 oz 3/4" no kink quarter turn solid Brass Ball Valve with Garden Hose Hook Up. For more info about lead free compliant, please visit epa. Gov. Attention: reverse threaded fitting nut, turn clockwiSE to LOOSEN. 15 second/gallon or 4GPM, Tested with 2 ft Water. Heavy duty 4. 0 oz solid brass bulkhead fitting, female 3/4" npt threaded on both ends, install spigot on either end. Large 10mm flow opening, Great Flow Rate at Approx.
BrandRAINPAL #ad
ManufacturerRAINPAL #ad
Height2 Inches
Length4 Inches
Weight0.59 Pounds
Width1.75 Inches
Part NumberFBA_RBS022
ModelFBA_RBS022
WarrantyLife Time Warranty against Leak, Break or Crack

4. Hourleey

#ad

Hourleey Brass Rain Barrel Quarter, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting, Rain Barrel Spigot Kit 1/2 inch

#ad
Hourleey #ad - Applicable scenarios: bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.

3 inches. High quality: heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, no kinks, with spigot installed at both ends. Intimate help: for helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket. Heavy-duty 1-1/8 inches, right-angle rotating solid brass ball valve. Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench. Two installation methods: Front mounting and rear mounting of brass bulkhead fittings.
BrandHourleey #ad
ManufacturerHourleey #ad

5. RTS Companies Inc

#ad

Brown, RTS Home Accents 50-Gallon Rain Water Collection Barrel with Brass Spigot

#ad
RTS Companies Inc #ad - Aluminum screen keeps out debris and insects; Designed to be child and pet safe with no large openings. Brass spigot shut off valve for hose hook-up with dual overflow; A front side overflow keeps water from flooding against your outside wall.

Flat back to sit flush against a wall; linkable to other barrels to increase water collection. Rain barell is 33. 5” tall x 24” wide x 18. 25” deep. Authentic oak barrel texture is molded into each barrel; Will not fade, rot or risk insect infestation. Save water and money by capturing rainwater to use for your lawn and garden; Optional stand to make filling watering cans easier sold separately, item # 55100002008081.
BrandRTS Companies Inc #ad
ManufacturerRTS Companies #ad
Height34 Inches
Length19 Inches
Weight18 Pounds
Width24 Inches
Part Number55100009005681
Model55100009005681
Warranty1 year parts

6. Renator

#ad

And Polyester Wire, 3/4" Quarter Turn Ball Valve w/Bulkhead Fitting, Renator P72-02440G Brass Spigot for Rain Barrel. Lead-Free Compliant, Thread Tape

#ad
Renator #ad - A quality spigot designed for maximum water flow. Visit epa. Gov for more info. Complete kit at a fair price. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons.

Installation so quick, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans. This kit contains: 3/4" spigot with quarter turn valve, wire, installation guide. No leaks. From using a brass ball valve and body and aluminum handle with orange paint spray, compliant with the EPA's Lead Free requirement. Make use of the water collected from your rain barrel easily and quickly.

The spigot also contains less than 025% lead, durable construcTION. Required: drill, a 1-1/4 inch saw bit, 3/4 inch bulkhead fitting with washer, roll of teflon tape, adjustable or 1 inch wrench. The product also comes with a detailed, you'll barely HAVE TIME TO GET YOUR DRILL OUT. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design.
BrandRenator #ad
ManufacturerRenator #ad

7. WADEO

#ad

WADEO Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

#ad
WADEO #ad - Heavy duty 1-1/8 inch without kink quarter turn solid brass ball valve. Your good helper: we provide a thread seal tape and two washers 8mm between inner ring and outer ring, which can help you install the rain barrel spigot conveniently and effectively prevent leakage.

Tools needed for installation: Electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench. Bulkhead fittings need 1 inch diameter holes to install. Fit up to 1. 3 inch thickness wall. Two installation methods: Brass bulkhead fittings front mounting and back mounting. Heavy duty 3. 14 oz solid brass bulkhead fitting, 1-1/8 inch female threaded all the way, install spigot on either end.
BrandWADEO #ad
ManufacturerWADEO #ad
Weight0.51 Pounds

8. Mudder

#ad

Mudder PVC Spigot Rain Barrel Faucet Kit 3/4 Inch PVC Rain Barrel Valve with Bulkhead Fitting and Hose Adapter, Rain Barrel Garden Spigot Kit for Aquariums Water Tanks Pools Black with Dark Green

#ad
Mudder #ad - Practical design: the pvc spigot rain barre faucet kit is able to fast and easy to empty your rain barrel water into a watering can versus a slow garden hose; Sturdy structure allows it to be applied for all seasons and different weather situations.

What you receive: 1 piece 3/4 inch pvc ball valve, 1 piece 3/4 inch PVC bulkhead fitting and 1 piece 3/4 inch PVC hose adapter are included in the garden spigot kit, practical tools for daily life. Dimension: the rain barrel spigot kit measures approx. Easily installation: just drill 1. 6 inch hole to install bulkhead fitting adapter with durable silicon seal gasket that will seal the water tight, you can finish the installation quickly.

Suitable applications: the bulkhead fitting adapter with 4 mm thick durable silicone seal gasket that will contour to the shape of the round barrel plumbing, irrigation, swimming pools, suitable for aquariums, reef tank, water parks and OEM applications, etc.3/4 inch; the rain barrel spigot kit is made of PVC material, break and peel, not easy to fade, durable PVC material and sturdy construction make it to serve you for long time.
BrandMudder #ad
ManufacturerMudder #ad
Part NumberMudder-14760

9. WADEO

#ad

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

#ad
WADEO #ad - Heavy duty 1-1/8 inch without kink quarter turn solid brass ball valve. Tools needed for installation: Electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench.

Heavy duty solid brass bulkhead fitting, 1-1/8 inch female threaded all the way, install spigot on either end. Bulkhead fittings need 1 inch diameter holes to install. Fit up to 1. 3 inch thickness wall. Your good helper: we provide a thread seal tape and two washers 8mm between inner ring and outer ring, which can help you install the rain barrel spigot conveniently and effectively prevent leakage. Two installation Methods: Brass bulkhead fittings front mounting and back mounting.
BrandWADEO #ad
ManufacturerWADEO #ad
Part NumberHG0069+IT0245+IT0244-MDUS

10. FCMP Outdoor

#ad

FCMP Outdoor Rain Catcher RC4000 Rain Barrel, 50 Gallon, Colour Brown

#ad
FCMP Outdoor #ad - The aluminum mesh screen keeps out debris to keep the water clear. Spigots on the side of the barrel allow you to connect multiple Rain Catcher barrels in-series for easy expansion of your rain water storage capacity.

The large opening and flat back design allow for easy installation and placement of the downspout while the spoke and wheel pattern in the top of the barrel keeps it child and pet safe. The overflow connection at the back of the barrel allows excess water to flow down and underneath the barrel to direct it away from foundations. Includes debris screen, shut-off thumb valve, overflow hose, hanging hose clip, garden hose, and linking kit for connecting other RC4000 rain barrels.
BrandFCMP Outdoor #ad
ManufacturerForest City Models and Patterns #ad
Height32 Inches
Length24 Inches
Weight24 Pounds
Width24 Inches
Part NumberRC4000-BRN
ModelRC4000-BRN
Warranty1 year on manufacturing defects