Top 8 1/2 inch Irrigation tubing Connectors – Automatic Drip Irrigation Kits

As an Amazon Associate I earn from qualifying purchases.

1. Sparkfire


Tees, End Cap Plugs Irrigation Water Hose Connector, Sparkfire 42Pcs Drip Irrigation Fittings Kit Irrigation Barbed Connectors for 1/2" Tubing Switch Valves, Elbows, End Closures, Couplings

Sparkfire #ad - It is sturdy and will last for a long time. Make sure the size and accessories are suitable. If you have problem about our item, pl feel free to contact us. Notes: before buying, you'd better measure the tubing and hose inner diameter.

Fits most tubing 1/2 inch: these 16mm drip irrigation fittings fit most brands of 1/2 inch irrigation tubing 16mm. 520-. 540" id. Save time and build your complete drip irrigation system at once. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps.

Ideal for garden greenhouse, lawn, patio, flower Bed, etc. The irrigation fittings kit includes 2 switch valves, 8 End Cap Plugs, 8 tees, 8 elbows, 8 couplings, 8x End Closures. Our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic.
BrandSparkfire #ad
Manufactureryaxing #ad
Height1.18 Inches
Length1.57 Inches
Width1.18 Inches

2. One Stop Outdoor


One Stop Outdoor 20-Pack, Barbed Connectors Fits Most Brands, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems Coupling 20-Pack, Irrigation Fittings Coupling for 1/2" Drip Tubing

One Stop Outdoor #ad - Simply push the tubing firmly over the barbs for a very tight fit that won't leak. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.

If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Simple to install. High impact Plastic Construction. Secure and easy installation without glue, tools, or clamps. Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. 20 piece - couplings - create two way connections of poly tubing or dripline. Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

3. Jayee


Sprinkler Tubing Connector for Drip System, Jayee 50 Pack Drip Irrigation Barbed Coupling Fittings 17mm for 1/2" Drip Hose0.600”ID

Jayee #ad - Tips: heat the end of hose to help it slide on this coupling. Wide applicationthis 1/2 inch irrigation tubing fitting helps to build a maintenance-free irrigation system, it is Ideal to use for garden, flower bed, greenhouse, patio and agricultural watering applications.

Package includedit includes 50 Pcs of 1/2”drip irrigation tubing coupling in total. Durable materialmade of high-impact, high-strength plastic material, this 1/2 inch coupling assures more durable life. Easy to installsimply push this tubing connector can connect it with tubing firmly and its barbed design makes NO LEAKS possible. Sizelength: approx. 52. 6mm/2. 07", inner diameter: approx. 108mm/043". These 17mm barbed couplings are compatible with Rainbird, Outer Diameter: approx. 17mm/067", orbit and other 1/2 inch drip tubing.
BrandJayee #ad

4. iRunning


Drip Line Couplings for Drip Sprinkler Garden Systems, iRunning 18 Pieces Drip Irrigation 1/2" Tubing Coupling Fittings 17mm, Barbed Coupler Connectors for 1/2 Inch Irrigation Tubing 0.600" ID

iRunning #ad - Easy to installit is easy to install without any glue, tools or clamps. Wide applicationthese coupling fittings for 1/2 inch sprinkler hose is ideal for garden, farm, flower bed, greenhouse, lawn, patio and other agricultural watering system.

Package listit comes with 18 pieces barbed coupling connectors, which let you connect your irrigation systems as you wish. Note: please check the size of tubing carefully before purchasing. Perfect match 1/2 inch irrigation tubingthese 1/2 inch irrigation coupling fittings can connect two sections of any standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID.

Made of durable plastic materialthe drip line couplers are made of high quality engineering plastics, strong, water resistant, so our irrigation coupling connectors are durable, chemical-resistant and long-lasting than others. Directly insert this irrigation tubing coupling at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection.
BrandiRunning #ad
ManufactureriRunning #ad
Part NumberPD-17486

5. Habitech


Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT, Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter

Habitech #ad - Simply loosen nut to remove tubing. Large fitting ID means less flow restriction. Please make sure your tubing specifications fall within these ranges for the proper fit. Just insert and twist, no special tools needed.

Zero leaks: barb design ensures tubing will not slip out or blow off at high pressure and temperature. Durable construction provides years of reliable use. No slippage or leaking, even under high pressure. Patented locking technology: quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on.

Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal. Stress-free fit: our irrigation faucet adapter connection works with the widest range of half inch tubing,. 620 to. 710” outside diameter and. 045 to. 055 wall Thickness.
BrandHabitech #ad
ManufacturerHabitech #ad
Height1.25 Inches
Length2.5 Inches
Weight0.06 Pounds
Width1.25 Inches
Part Number4336485431

6. Honoson


Drip Irrigation Barbed Tee 10 Pieces 1/2 Inch to 1/4 Inch Adapter Irrigation Tubing Connector Barbed Locking Fittings Fits 16 mm Drip Tape Tubing Green

Honoson #ad - What you can get: you will receive a package which includes 10 pieces 1/2 inch to 1/4 inch drip irrigation barbed tees, which suitable for most 1/2 inch tubing and 1/4 inch drip line, the sufficient quantity is enough for your daily use and replacement. Locking function design: these connectors have a locking function, which can help the irrigation tubing connection more firmly, it also has 4 connectors for connecting 1/4 inch hoses for drip irrigation distribution, which nicely saves you time and energy.

Practical tools: you can connect the drip irrigation connector with the appropriate size drip irrigation pipe according to your needs; Then tighten the knob to ensure a firm connection and prevent leakage; The operation is very convenient, please soften the hose with hot water to achieve a better connection before use.

Leak-proof functions: these drip irrigation tubing connectors are made of quality plastic, will not be easily deformed and broken, have anti-corrosion and leak-proof functions, which is reliable and durable, and will last for a long time. Wide range of use: our drip irrigation accessories for 1/2 inch to 1/4 inch hoses help to build a practical and useful irrigation system, flower beds, widely suitable for gardens, helping you guide the water precisely to where you need it, terraces and other agricultural irrigation systems.
BrandHonoson #ad
ManufacturerHonoson #ad



6 Tees, 1 Switch Valves- Barbed Locked Nuts Connectors, 4 Ends, 19 Pcs Pond Irrigation 1/2 inch Vinyl Tubing Fittings Kit, 6 Couplings, 2 Elbows, For 1/2" ID x0.6- 0.63" OD 16mm Drip Tubing

FULAIERGD #ad - Upgrade packaging: the irrigation vinyl tubing fittings kit includes1Switch Valves, 6 Couplings, 4 Ends, 6 Tees, 2 Elbows . Easy to install: no glue, tools or fixtures are required, Just push the tube firmly onto the barb and tighten the nut.

Save time and build your complete drip irrigation system at once. Fits for drip irrigation fittings for pipes with an inner diameter of 1/2 inch and an outer diameter of 06-063” 16 mm tubing。. Durable material: the drip irrigation lock cap barb connector is made of environmentally friendly anti-aging, anti-ultraviolet high-strength plastic. It is sturdy and will last for a long time. Widely used:ideal for use with raised garden beds, farm, residential, greenhouse gardening and agricultural watering applications. The twist lock increases the tightness of the tube and will not leak.
ManufacturerFULAIERGD #ad
Height0.78 Inches
Length3.9 Inches
Weight0.84 Pounds
Width0.78 Inches

8. Dig


Gardening, Hydroponics, 25-Pack Drip Irrigation Compression Coupling .700 O.D. for Use with Drip Irrigation Tubing, Watering Poly tubing with .680 OD.700 OD and .704 OD

Dig #ad - Secure and easy installation without glue or clamps! Check your tubing size before use: one size does not fit all: this fitting is. 700 od with black insert FITS: drip poly tubing with. 680 od,. 700 od and. 704 od. Recommended operating pressure: 15 to 35 PSI 25 PSI pressure regulator is recommended. Made with high-impact UV-resistant plastic. Maximum operating pressure: up to 60 PSI.
BrandDig #ad
ManufacturerDIG #ad