As an Amazon Associate I earn from qualifying purchases.
Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
Please notice the controller might be power off if the battery voltage is too low. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge.

Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. It also comes with a Lithium activation feature. Support multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries.

Easy to use: the charge controller should connect the battery first, then the solar panel, low heat production. Please be careful to install the charger controller in a flat, finally the load. Dual usb output 5V/2. 5a max, to support mobile phone charging.
Six protection functions: 20a solar controller has short-circuit protection, Under-voltage protection, Overload protection, Over-voltage protection. The disassembly sequence is contrary to the wiring order. 20a solar charge controller: 20a solar panel battery intelligent regulator are ul 1741 certified, build-in industrial microcontroller, the solar charger controller compatibility with 12V 24V system. Note: the charge controller will heat up when it is running.

Available for dc lamp and phone charging Please correctly connect the positive and negative terminals, when solar panel regulator is charging, makes sure all terminals are connected tightly.
Fully automatic: this solar panel regulator with output switch, easy to operate. Pay special attention to + - polarity to avoid reversed connection. Rated discharge current : 20a; usb output voltage: 5v; usb output current: 1. 5a; dc output voltage: 12v-24v, DC Output Current: 20A. Lcd screen display: this solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient.

Multiple battery adaptation 4 deep cycle battery Pre-Sets: Gel, Lithium-Iron Phosphate 12. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation.8
Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99 percentage and peak conversion efficiency of 98 percentage It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.

The optimized 3-stage battery charging system helps to regulate the flow of electricity, thereby prolonging your battery's lifespan. Works with Sealed, and Flooded lead-acid batteries.
It helps you monitor your PV system in real-time. You should first connect the battery, then the solar panel, or mobile device via the USB-A port. It can also be used to power your home's outdoor security camera system via its USB-A port. Safe to use - your valuable pv system needs a little charge controller to provide full protection throughout the day. It also offers short circuit, over discharge, overcharge, and overload protection.

Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.

It has short circuit protection, over discharge protection, over charge protection, reverse protection. Can extends battery life time. Ip68 rated waterproof, this intelligent 4-stage pWM solar charging controller is suitable for outdoor use, solar monitoring system, you can use it for solar fencing system, solar lighting system or other solar system.

Easy to usethe charge controller should connect the battery first, adjustable parameter, solar panel charge controller suitable for home, then the solar panel, industrial, and finally the load.
Lcd displaycharge controllers for solar panels comes with a display that can clearly indicate the status and data, suitable for home, 12v solar charge controller can be conveniently switched modes and parameter configuration, industrial, commercial etc. Solar charge controller controlcharge controller for protecting the lifespan of your battery, once the voltage of the battery out of range, the solar controller will turn off automatically.
1. ALLPOWERS
#ad
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
#adALLPOWERS #ad - Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Good heat dissipation: dual mosfet reverse current protection, low heat productionALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place.Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
More information #ad
Easy to use: comes with a display that can clearly indicate the status and data, industrial, it can be conveniently switched modes and parameter configuration, suitable for home, commercial etc. Please notice the controller might be power off if the battery voltage is too low. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge.
Brand | ALLPOWERS #ad |
Manufacturer | ALLPOWERS #ad |
Part Number | FBA_AP-OT-002-BBLU |
Model | FBA_AP-OT-002-BBLU |
More information #ad
2. Renogy
#ad
Flooded and Lithium Battery, Gel, Yachts, Boats, Voyager 20A, Trailers, Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Used in RVs
#adRenogy #ad - Ip67 rated waterproof: with an ip67 rated waterproof design, rain, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, or condensation.4-stage pwm technology: the voyager controller is equipped with advanced smart PWM technology with high charging efficiency.Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
More information #ad
Multiple protections: the voyager controller has multiple intelligent protections against reverse polarity, short-circuit, over charge, overload, reverse current, and over discharge, keeping your battery fully protected. It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. It also comes with a Lithium activation feature. Support multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 1.4 Inches |
Length | 6.08 Inches |
Weight | 0.55 Pounds |
Width | 3.83 Inches |
Part Number | RCC20VOYP-G1 |
Model | Voyager |
Warranty | 2-year material and workmanship warranty |
More information #ad
3. EEEKit
#ad
EEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue
#adEEEKit #ad - Fully 3-stage pwm charge management, Overcharge protection, Over Current Protection, improve system efficiency and prolong the life span of the battery. Discharge current: 10A, automatically manage the working of solar panel and battery in solar system. Dual mosfet Reverse current protection, well-ventilated place.Easy to use: the charge controller should connect the battery first, then the solar panel, low heat production. Please be careful to install the charger controller in a flat, finally the load. Dual usb output 5V/2. 5a max, to support mobile phone charging.
More information #ad
Battery type: the charge regulator is only suitable for lead-acid batteries: opEN, AGM, GEL, once the voltage of the battery drop below 8V, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, the solar controller will turn off automatically. Six protection functions: 20a solar controller has short-circuit protection, Under-voltage protection, Overload protection, Over-voltage protection. The disassembly sequence is contrary to the wiring order. 20a solar charge controller: 20a solar panel battery intelligent regulator are ul 1741 certified, build-in industrial microcontroller, the solar charger controller compatibility with 12V 24V system. Note: the charge controller will heat up when it is running.
Brand | EEEKit #ad |
Manufacturer | EEEkit #ad |
Height | 2.5 Inches |
Length | 7 Inches |
Width | 13.5 Inches |
Part Number | H930712-E001347911 |
More information #ad
4. GHB
#ad
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
#adGHB #ad - To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Protection functions: overload and short circuit protection, Reverse Polarity protection. Power-efficient: microcontroller digital accuracy, when the battery was a full charge, the arrow between the panel icon and the battery icon will flash fastly, it will be slow flashed, will stop charging.Available for dc lamp and phone charging Please correctly connect the positive and negative terminals, when solar panel regulator is charging, makes sure all terminals are connected tightly.
More information #ad
The battery indicator light on the controller will be on if successfully connected. The function of the solar charge controller is to protect the voltage overshoot and discharge. Use pwm and wpc mode, lightning protection, Under-voltage protection, Over-charging protection, improve system efficiency and prolong the life span of the battery. Fully automatic: this solar panel regulator with output switch, easy to operate. Pay special attention to + - polarity to avoid reversed connection. Rated discharge current : 20a; usb output voltage: 5v; usb output current: 1. 5a; dc output voltage: 12v-24v, DC Output Current: 20A. Lcd screen display: this solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient.
Brand | GHB #ad |
Manufacturer | Smile&Satisfaction #ad |
Height | 1.18 Inches |
Length | 5.12 Inches |
Width | 3.94 Inches |
Part Number | CMG-2420 |
Model | CMG-2420 |
More information #ad
5. Renogy
#ad
Rover Elite 20A, Renogy Solar Charge Controller 12V/24V Auto MPPT with LCD Backlit Display w/Temp Sensor Fit for Gel Sealed Flooded and Lithium Battery
#adRenogy #ad - Full system protectionmeant to safeguard your system, short-circuiting, battery over-discharging, battery overcharging, overload, the self-diagnostic capability can assess and protect against reverse polarity, and reverse current.Multiple battery adaptation 4 deep cycle battery Pre-Sets: Gel, Lithium-Iron Phosphate 12. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation.8
More information #ad
8v, flooded, and Sealed/AGM. 12v/24v automatically detect12V /24V Automatic System Recognition for non-lithium batteries. Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99 percentage and peak conversion efficiency of 98 percentage It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 2.62 Inches |
Length | 6.36 Inches |
Weight | 1.65 Pounds |
Width | 3.85 Inches |
Part Number | RCC20RVRE-G1 |
Model | Solar Charge Controller |
Warranty | 2-year material and workmanship warranty |
More information #ad
6. HQST
#ad
HQST 20Amp 12V/24V PWM Solar Charge Controller Regulator with LCD Display, USB-A Port, Flooded Lead-Acid Batteries, Compatible with Sealed
#adHQST #ad - 20a solar charge controller - it can automatically detect 12v or 24V PV systems. It provides reverse polarity protection and block reverse current at night for your solar panel and battery. Easy to install - this pwm solar charge controller is designed with corresponding icons on each connector, and finally your light bulb, which will help you get quick installs.The optimized 3-stage battery charging system helps to regulate the flow of electricity, thereby prolonging your battery's lifespan. Works with Sealed, and Flooded lead-acid batteries.
More information #ad
Accurate lcd display - the large digital lCD display clearly indicates the working condition and accurate operating data. Multiple applications - connect it with your solar panel system and battery to work on an RV, chicken coop, garage, cabin, workshop, or harbor freight to provide lighting. It helps you monitor your PV system in real-time. You should first connect the battery, then the solar panel, or mobile device via the USB-A port. It can also be used to power your home's outdoor security camera system via its USB-A port. Safe to use - your valuable pv system needs a little charge controller to provide full protection throughout the day. It also offers short circuit, over discharge, overcharge, and overload protection.
Brand | HQST #ad |
Manufacturer | HQST #ad |
Height | 2.95 Inches |
Length | 5.12 Inches |
Weight | 0.31 Pounds |
Width | 1.38 Inches |
More information #ad
7. Renogy
#ad
Rover 20A, Renogy Rover 20A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
#adRenogy #ad - 12v/24v automatically detectautomatically detects 12v or 24v dc system voltages for Non-Lithium battery types, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes. Full system protectionmeant to safeguard your system, overload, battery overcharging, battery over-discharging, short-circuiting, the self-diagnostic capability can assess and protect against reverse polarity, and reverse current.Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
More information #ad
Remote monitoringrs232 communication port allows the renogy rover to communicate with the Renogy BT-1 Bluetooth module NOT included in the package, highly recommend to add-on that will enable you to monitor the status and productivity of your panels through the Renogy DC Home App. Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 2.34 Inches |
Length | 5.94 Inches |
Weight | 1.5 Pounds |
Width | 8.27 Inches |
Part Number | RNG-CTRL-RVR20 |
Model | Charge Controller |
Warranty | 2-year material warranty |
More information #ad
8. HUINE
#ad
HUINE 20A 12V 24V Auto IP68 Waterproof PWM Solar Charge Controller Solar Panel Battery Intelligent Regulator for Solar System Caravan Boat24 Hours Working Mode
#adHUINE #ad - With short cables for connecting with solar panel, and three LED lights can help you to know solar charging status, battery level, battery and load, and load status.It has short circuit protection, over discharge protection, over charge protection, reverse protection. Can extends battery life time. Ip68 rated waterproof, this intelligent 4-stage pWM solar charging controller is suitable for outdoor use, solar monitoring system, you can use it for solar fencing system, solar lighting system or other solar system.
More information #ad
Easy to mount directly on the frame of the solar panel, with heat sink design at bottom and 2pcs mounting holes. Can automatically senses 12v or 24 Volt for your batteries, working mode of the solar charge regulator is 24 hours. Its small size also can saves you some space.Brand | HUINE #ad |
Manufacturer | HUINE #ad |
Height | 0.83 Inches |
Length | 3.23 Inches |
Weight | 0.26 pounds |
Width | 1.77 Inches |
Part Number | PD-16540 |
More information #ad
9. Saooer
#ad
20A Solar Charge Controller, Solar Panel Charge Controller Intelligent Regulator with Dual USB Port 12V/24V,PWM Auto Paremeter Adjustable LCD Display Orange
#adSaooer #ad - Multiple protection functionssolar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection. Pwm solar charge controller improve system efficiency and prolong the life span of the battery. Discharge current is 20A, automatically manage the working of solar panel and battery in solar system.Easy to usethe charge controller should connect the battery first, adjustable parameter, solar panel charge controller suitable for home, then the solar panel, industrial, and finally the load.
More information #ad
Solar controller 12v 24v is LCD display, commercial etc. Dual usb, go power solar controller is build-in industrial micro controller, to support mobile phone chargeing. Solar charge controllerthe solar charger controller compatibility with 12V 24V system. Lcd displaycharge controllers for solar panels comes with a display that can clearly indicate the status and data, suitable for home, 12v solar charge controller can be conveniently switched modes and parameter configuration, industrial, commercial etc. Solar charge controller controlcharge controller for protecting the lifespan of your battery, once the voltage of the battery out of range, the solar controller will turn off automatically.
Brand | Saooer #ad |
Manufacturer | Saooer #ad |
More information #ad