Top 9 Wanderer Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Gel, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, and Flooded batteries and Renogy Bluetooth Module, Sealed

#ad
Renogy #ad - Optimized for a 12v system; Deep cycle Sealed, Flooded, Gel, and Lithium battery option ready. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Multiple led indicators for easy to read charge status and battery information. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Then secure each cable by rotating the screws clockwise CW to the closed position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.29 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller

2. Renogy

#ad

Gel, Grey, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed, & Flooded Batteries & Bluetooth Module

#ad
Renogy #ad - Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. Compatible with 12v and 24v systems. Aluminum heat sink allows for efficient heat dissipation.

Power source type: Solar-Powered. Intelligent protection built-in against reverse polarity, overcharging, overload, over-discharging, short-circuiting, and reverse current. Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the RenogyDC Home smartphone app. Also compatible with various Deep Cycle battery options: Sealed, Flooded, Gel, and Lithium 12.8

8v lfp. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, Boost, Float, maximizing the energy from solar panels to charge your system.4-stage charging bulk, and Equalization and temperature compensation increase your battery life and improve your system's performance.
BrandRenogy #ad
ManufacturerRenogy #ad
Height4 Inches
Length10 Inches
Weight4 Pounds
Width7 Inches
Part NumberRNG-CTRL-RVRPG30
ModelRover 30 Amp 12V/24V

3. Renogy

#ad

Gel, Compatible with Sealed, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Flooded and Lithium Batteries

#ad
Renogy #ad - 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. Intelligent protection against: reverse polarity, short-circuit and reverse current. Smart 4 stage pwm charging bulk, boost, overcharging, Float and Equalization and temperature compensation increases battery life and improves system performance.

Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. Backlit lcd screen for displaying operating information and error codes. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. The adventurer is a negative ground controller. Designed to cleanly flush mount on walls, providing a sleek, integrated look. 5v 2. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. An included surface Mount Attachment allows for versatility in mounting.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.6 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

4. Renogy

#ad

Renogy 100W 12V Monocrystalline Solar Starter Kit w/Wanderer 10A Charger Controller

#ad
Renogy #ad - El tested solar modules; no hot-spot heating. Power source Type: Solar Powered. Tpt back sheet ensures smooth performance over a long period of time. Ip65 rated junction box provides complete protection against environmental Particles and low pressure water jets. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. The renogy wanderer is equipped with multiple electronic protections; overcharging, overload, short-circuit and reversed polarity. 9%. High solar cell efficiency: Mono-crystalline 21. 0%, polycrystalline 17.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.5 Inches
Length20.87 Inches
Weight16.5 Pounds
Width47.01 Inches
Part NumberSolar Starter Kit
ModelSolar Starter Kit

5. Renogy

#ad

Renogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit

#ad
Renogy #ad - Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Power source type: Solar Powered. Optimum operating Current Imp: 5. Negative grounding controller with battery reversed, overloading, short-circuit and over charging/discharging protection ensures the broader off grid applications and safety.

Ideal output: 500wh per day; can fully charge a 50Ah Battery from 50% in 3 hours depending on the availability of sunlight. 29a. With the renogy wanderer 30a pwm charge Controller, you can expand your system up to a maximum of 400W. Monocrystalline solar cell efficiency: 21%;The Charge controller has been upgraded to Renogy new 30A PWM negative ground charge controller The Renogy wanderer.

Especially can be used on a vehicle which has battery negative on the chassis. Includes 100w solar panel + 30a pwm negative ground charge controller + Solar Panel Connectors +8Ft 10AWG Tray Cable+ Mounting Z Brackets for RV, Boat.
BrandRenogy #ad
Manufacturerrenogy #ad
Height20.87 Inches
Length47.01 Inches
Weight19.84 Pounds
Width1.5 Inches
Part NumberKIT-STARTER-100D
ModelKIT-STARTER-100D
WarrantyPower Output Warranty

6. Renogy

#ad

Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit with 40A Rover MPPT Charge Controller

#ad
Renogy #ad - This kit includes our 40a mppt charge controller which uses Maximum Power Point Tracking technology, transferring power up to 30% more efficiently than PWM charge controllers. Order will be delivered in multiple packages. You can expand your system up to a maximum of 400W 12 Volt or 800W 24 Volt with a Renogy 40A MPPT Charge Controller. With a renogy 400w monocrystalline starter Kit MPPT, you won't have to wonder about whether you're getting the most out of your system. Monocrystalline solar cell efficiency: 21%; MPPT charge controller peak efficiency: 97%.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.38 Inches
Length42.2 Inches
Width19.6 Inches
Part NumberB06X1FV5N2
ModelRNG-KIT-STARTER400D-RVR40

7. SUNNYSKY

#ad

SUNNYSKY Best 60A MPPT Solar Charge Controller 60A 12V24V48V Auto Increase Power Generation by 25%, and The Choice of 80% of American Buyers

#ad
SUNNYSKY #ad - Display daily generation and cumulative power generation. Negative ground, Max 150V PV input. Support 4 charging options: Sealed, Gel, Flooded and User-defined. The components are premium brand, the theoretical design life span is >10 years, and the high temperature resistance is >105℃. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%.
BrandSUNNYSKY #ad
ManufacturerSUNNYSKY #ad
Height7.09 Inches
Length9.84 Inches
Weight5.73 Pounds
Width2.95 Inches
Part NumberMPPT-60AI
ModelMPPT-60AI
Warranty2 years warranty

8. Renogy

#ad

Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Charges over-discharged Lithium-Ion batteries. 4-stage charging: bulk, and short circuit.

Compatible with various deep cycle battery options: sealed, overload, and lithium. Reverse protection: any combination of solar module and Battery, gel, and equalization and LCD screen with programmable charging parameters. Error code detection for easy self diagnoses. Conversion efficiency of 98%. Electronic protection: overcharging, Float, Flooded, boost, over-discharging, without causing damage to any component.

Customizable charging voltages. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy DC Home Smart phone app.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium
Warranty2-year material and workmanship warranty

9. iSunergy

#ad

ISunergy 1000W Wind Solar Hybrid Charge Controller PWM 600W Wind + 400W Solar Boost Charge Technology Digital Intelligent Regulator with LCD Display

#ad
iSunergy #ad - In high wind speed or wind turbine power is beyond the reach of the battery and charge absorption, the controller immediately launched the continuous discharge function, the equipment protection system.

The humanized keys operate function, all of the parameters according to the request of customers in orders to adjust all kinds of using environment. Lcd screen clearly displays the voltage and electric quantity of the storage battery, this product is artistic, economical and practical. Solar charging uses series mos tube PWM charging technology, which makes the controller's power consumption small and the system more stable.

The controller's power supplies use high-quality imported components to ensure excellent controller performance and stability. The complementary wind-solar controller is designed for the wind and solar power generation system, which integrates the control of wind and solar energy.
BrandiSunergy #ad
ManufactureriSunergy #ad
Part Number1000W-Blcak