Top 9 Wanderer Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Gel, Sealed, and Flooded batteries and Renogy Bluetooth Module, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium

#ad
Renogy #ad - Optimized for a 12v system; Deep cycle Sealed, Flooded, Gel, and Lithium battery option ready. Then secure each cable by rotating the screws clockwise CW to the closed position.

Multiple led indicators for easy to read charge status and battery information. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.29 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller

2. Renogy

#ad

Flooded and Lithium Batteries, Compatible with Sealed, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Gel

#ad
Renogy #ad - Backlit lcd screen for displaying operating information and error codes. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. 5v 2. An included surface Mount Attachment allows for versatility in mounting.

4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. Any negative connection on the solar module, battery and load can be safely earth grounded as required. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. Designed to cleanly flush mount on walls, providing a sleek, integrated look.

Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. The adventurer is a negative ground controller. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.6 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

3. Renogy

#ad

Renogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit

#ad
Renogy #ad - Ideal output: 500wh per day; can fully charge a 50Ah Battery from 50% in 3 hours depending on the availability of sunlight. Negative grounding controller with battery reversed, overloading, short-circuit and over charging/discharging protection ensures the broader off grid applications and safety.

With the renogy wanderer 30a pwm charge Controller, you can expand your system up to a maximum of 400W. Optimum operating Current Imp: 5. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Especially can be used on a vehicle which has battery negative on the chassis.

29a. Power source type: Solar Powered. Includes 100w solar panel + 30a pwm negative ground charge controller + Solar Panel Connectors +8Ft 10AWG Tray Cable+ Mounting Z Brackets for RV, Boat. Monocrystalline solar cell efficiency: 21%;The Charge controller has been upgraded to Renogy new 30A PWM negative ground charge controller The Renogy wanderer.
BrandRenogy #ad
Manufacturerrenogy #ad
Height20.87 Inches
Length47.01 Inches
Weight19.84 Pounds
Width1.5 Inches
Part NumberKIT-STARTER-100D
ModelKIT-STARTER-100D
WarrantyPower Output Warranty

4. Renogy

#ad

Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - Compatible with various deep cycle battery options: sealed, and short circuit. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy DC Home Smart phone app.

Electronic protection: overcharging, gel, Flooded, overload, Float, and equalization and LCD screen with programmable charging parameters.4-stage charging: bulk, over-discharging, and lithium. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Conversion efficiency of 98%.

Charges over-discharged Lithium-Ion batteries. Customizable charging voltages. Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Reverse protection: any combination of solar module and Battery, boost, without causing damage to any component. Error code detection for easy self diagnoses.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium
Warranty2-year material and workmanship warranty

5. Binen

#ad

Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A, 30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent

#ad
Binen #ad - Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, well-ventilated place. Discharge current: 10A, automatically manage the working of solar panel and battery in solar system.

Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. 30a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, the solar charger controller compatibility with 12V 24V system. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, once the voltage of the battery drop below 8V, lithium, GEL, it is not suited for nickel hydride, AGM, or other batteries. For protecting the lifespan of your battery, Liions, the solar controller will turn off automatically.

Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, industrial, suitable for home, commercial etc. For protecting the lifespan of your battery, open-circuit protection, reverse protection, the solar controller will turn off automatically. Note: the charge controller will heat up when it is running. Dual usb output 5V/2. 5a max, to support mobile phone chargeing.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

6. Renogy

#ad

Renogy 100W 12V Monocrystalline Solar Starter Kit w/Wanderer 10A Charger Controller

#ad
Renogy #ad - Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. 9%. Ip65 rated junction box provides complete protection against environmental Particles and low pressure water jets. The renogy wanderer is equipped with multiple electronic protections; overcharging, overload, short-circuit and reversed polarity. Tpt back sheet ensures smooth performance over a long period of time. 0%, polycrystalline 17. High solar cell efficiency: Mono-crystalline 21. Power source Type: Solar Powered. El tested solar modules; no hot-spot heating.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.5 Inches
Length20.87 Inches
Weight16.5 Pounds
Width47.01 Inches
Part NumberSolar Starter Kit
ModelSolar Starter Kit

7. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, or other batteries. Note: the charge controller will heat up when it is running. Fully 3-stage pwm charge management, reverse protection, improve system efficiency and prolong the life span of the battery.

Easy to install and operate: the charge controller should connect the battery first, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, low heat production. Discharge current: 10a, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. 20a solar charge controller : binen solar charger controller are ul 1741 certified, the solar charger controller compatibility with 12V 24V system.

Lcd display: comes with a display that can clearly indicate the status and data, suitable for home, industrial, it can be conveniently switched modes and parameter configuration, commercial etc. Dual usb output 5V/2. 5a max, to support mobile phone chargeing. Multiple protection functions: binen solar controller has short-circuit protection, open-circuit protection, over-load protection. Please be careful to install the charger controller on a flat, then the solar panel, well-ventilated place.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

8. SUNNYSKY

#ad

And The Choice of 80% of American Buyers, SUNNYSKY Best 60A MPPT Solar Charge Controller 60A 12V24V48V Auto Increase Power Generation by 25%

#ad
SUNNYSKY #ad - Support 4 charging options: Sealed, Gel, Flooded and User-defined. Display daily generation and cumulative power generation. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%. The components are premium brand, the theoretical design life span is >10 years, and the high temperature resistance is >105℃. Negative ground, Max 150V PV input.
BrandSUNNYSKY #ad
ManufacturerSUNNYSKY #ad
Height7.09 Inches
Length9.84 Inches
Weight5.73 Pounds
Width2.95 Inches
Part NumberMPPT-60AI
ModelMPPT-60AI
Warranty2 years warranty

9. Renogy

#ad

Gel, Grey, & Flooded Batteries & Bluetooth Module, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed

#ad
Renogy #ad - Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, Boost, maximizing the energy from solar panels to charge your system.

Also compatible with various Deep Cycle battery options: Sealed, Flooded, Gel, and Lithium 12.88v lfp. Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the RenogyDC Home smartphone app. 4-stage charging bulk, float, and Equalization and temperature compensation increase your battery life and improve your system's performance.

Intelligent protection built-in against reverse polarity, over-discharging, overload, short-circuiting, overcharging, and reverse current. Power source type: Solar-Powered. Aluminum heat sink allows for efficient heat dissipation. Compatible with 12v and 24v systems.
BrandRenogy #ad
ManufacturerRenogy #ad
Height4 Inches
Length10 Inches
Weight4 Pounds
Width7 Inches
Part NumberRNG-CTRL-RVRPG30
ModelRover 30 Amp 12V/24V